RealTimeDesigner Support Network
Wiki Forums Libraries Docs Support RealTimeDesigner Home

RealTimeDesigner WIKI

This is an old revision of the document!


Chapter 6 - Libraries

LIBRARIES

Colors, Fonts and Clip Arts are stored in central libraries so that they can be easily called upon at various places in the system. Setting up the libraries can be time consuming if the default values don't work for you and your system is complex, but you will be able to recall the libraries very easily when setting up individual products.

COLOR LIBRARY

The Color Library consists of a list of all the colors you will be using for your products - both design colors and the colors of the products themselves. The RealTimeDesigner uses can use any of the millions of RGB colors, but rather than displaying rainbow color wheels for users, the RealTimeDesigner is configured to use specific RGB colors that you choose. This confines users to choosing from colors that yield predictable results. We've found that the color wheel selectors often print very differently than displayed on monitors, leading to unhappy web shoppers.

ADDING NEW COLORS

To add a new color to your RealTimeDesigner library, go to LIBRARIES > DEFINE COLORS. The color table consists of SHOW ORDER, RGB VALUES, NAME and COLOR SOURCE columns. The SHOW ORDER is used to sort the list in whatever sequence you prefer. If two or more colors have matching SHOW ORDERS, these colors will be sorted by name. The RGB (Red Green Blue) column is where color values are entered. The numbers can be any number from 0 to 255. These values are NOT hexadecimal. There is an exhaustive RGB color chart at http://rgbchart.com/ and a simpler one at http://en.wikipedia.org/wiki/Web_colors There are countless other versions available by searching the web. Enter the color name in the NAME column. If the color is specific to a brand or product, enter a name for the COLOR SOURCE, perhaps ORACAL VINYL or HANES. Be sure to click the ADD NEW button before proceeding.Click on the image to enlarge

EDITING COLORS

You can edit or delete colors from the list by clicking on the buttons to the right of the color. These changes are final and can not be undone.

DEFINING COLOR GROUPS

The LIBRARIES > DEFINE COLOR GROUPS screen allows you to group any number of colors from your color library into named groups. Later, when defining products, color assignment can be as easy as selecting the “TEXTILE INKS” color list.Click on the image to enlarge From the Define Color Group screen, click ADD A NEW GROUP. A complete list of your colors will be shown along with check boxes next to them. Place a check next to each color you wish to include in the group. Once you have selected all the colors to be in that group, click on the SAVE COLOR GROUP button.Click on the image to enlarge When your color list gets really long, checking all the colors of a new group can be tedious. The COLORS FILTER box allows you to filter the colors by the COLOR SOURCE used when defining the colors. If you entered HANES for the COLOR SOURCE for all HANES colors, you could then enter HANES in the filter box and select the HANES BEEFY T colors for the new group. OF course, individual colors can be used in multiple groups. IMPORTING / EXPORTING COLOR CHARTS The RealTimeDesigner allows you to import or export lists of colors or color charts. The EXPORT COLORS button will create a list of the current colors that you have in your system. Before trying to import any new color charts, export the color list and study the format. Keep in mind that imported color charts are loaded into the color list, but color groups. You will need to create your own groups once the colors are loaded.

SUPPLIER COLOR CHARTS

We've created numerous manufacturer color lists and placed them online at http://realtimedesigner.com/color_charts/colors.html To load the values into your system, in the ADMIN PANEL go here: LIBRARES OPTIONS > DEFINE COLORS > IMPORT COLOR FILE. You should open each file in excel and renumber the show order field so that the numbers don't overlap any of your existing color SHOW ORDER values. USING COLORS AT PRODUCT LEVEL The LIBRARIES SETUP section is the first part of using colors with your products. Now that you have defined the colors and color groups, you will need to set up each new product to use these colors. The PRODUCTS SETUP chapter will give you more details on using these colors with your products.

FONT LIBRARY

Any lettering inside the designer is done using fonts from your font library. The RealTimeDesigner uses standard TTF font files. Several generic fonts are loaded in the default setup, but you are encouraged to create your own list of fonts. Because of licensing rules, commercial products such as RealTimeDesigner can not include fonts that are free throughout the web.Click on the image to enlarge

ADDING NEW FONTS

The LIBRARIES SETUP > UPLOAD FONTS screen is used to upload new fonts. Like most other lists in the RealTimeDesigner, the Show Order column is used to sort the fonts in your list. If this field is left blank, the fonts will be sorted alphabetically. Upload the font TTF file using the BROWSE button. The NAME field is used because many font TTF files have cryptic names. You can also rename fonts to completely different names. Click the ADD NEW button activate the font upload.

VIEWING AND DOWNLOADING FONTS

You can view and download the fonts that are currently in your system. The VIEW TTF button will show you an example of the font as well as the details about the font creator. The DOWNLOAD TTF button will allow you to load the font onto your local computer so that you can ensure your design software will have these same fonts available.

DELETEING FONTS

The DELETE button will delete the font from your RealTimeDesigner system. Deleting is permanent and can not be undone. We recommend that you keep a backup copy of any fonts that you previously offered just in case past clients come back requesting minor changes to their work.

DEFINING FONT GROUPS

If you are going to have lots of fonts on your system, FONT GROUPS will be useful. By grouping fonts you can create pages of fonts such as STANDARD FONTS, CURLY FONTS, FREEHAND FONTS, SCRIPT FONTS, etc. These fonts will be shown on tabs so that users will not be overwhelmed by a very long list of fonts.Click on the image to enlarge

To define a new font group, click on ADD A NEW GROUP. The screen will change to show a list of all fonts on your system along with four text entry boxes. Enter the name of the font group in the GROUP NAME box. Select the fonts you wish to include in this group and click ADD NEW FONT GROUP. Individual fonts can be used in more than one group if you desire. The SUPER CATEGORY pull-down allows you to create nested lists of fonts which will display as pull down options for all groups that are nested below a top level group.

FONT RENDERING

When a users selects the FONT tool while using the designer, the list of available fonts can be shown in many ways. The list is configurable and can show the fonts by name in the standard text (FONT NAMES option), the font name can be displayed in that font (FONT IMAGES option) or the actual text being edited can be displayed in the list (DISPLAY TEXT option). There are rendering options that allow you to set the default rendering style as well as which of those three options are shown to your users.Click on the image to enlarge

USING FONTS AT PRODUCT LEVEL

Just like colors, defining fonts is only the first part to using fonts in the designer. You will also need to enable each product with the fonts you wish to use for that product. The RealTimeDesigner does not require that all products have every font in your system. This is useful for when certain fonts don't work well with particular products. CLIP ART LIBRARY The RealTimeDesigner comes with a fair selection of clip art installed. You can also upload your own clip art If you prefer, you can disable the system clip art and use entirely your own clip art System clip art and your own clip art are treated different in the RealTimeDesigner. While you have full edit-ability of individual clip arts that you upload, you are limited to turning system clip art categories on and off. You cannot control individual system cliparts.

DEFINING CLIPART CATEGORIES

Before you can upload clip art, you must define categories to organize the clip art. Click on the LIBRARIES > DEFINE CLIPART CATEGORIES link. The Clip art Categories screen contains columns for SHOW ORDER, NAMES and IMAGE. The SHOW ORDER is a numerical value that is used to sort the names of the categories. If this field is left blank or if two or more names have matching values, the names will be shown alphabetically. Enter the name for the category in the NAME field. If you wish, you can include an image to be displayed whenever the user is browsing the clip art categories in the designer. If you choose to use image, be consistent - include an image for every category. Be sure to click ADD NEW before moving from this screen.

EDITING CLIPART CATEGORIES

The Define Clip art Categories screen has options to make the category VISIBLE or HIDDEN. There are also EDIT and DELETE buttons. Changes to these are permanent and can not be undone.

UPLOAD CLIPART SCREEN

Once you have clip art categories defined, you can begin uploading clip art the LIBRARIES > UPLOAD CLIPART link will display the clip art upload screen. To enter the screen select the appropriate category from the pull-down list. A screen with a MASS ACTIONS section and a DETAILED VIEW - GALLERY VIEW showing all the clip art in that category will appear. Upon loading, the clip art is shown in GALLERY VIEW. Click on the image to enlargeClicking on DETAILED VIEW will reveal all of the data regarding each clip art.Click on the image to enlarge

UPLOADING CLIPART

Just below the DETAILED VIEW - GALLERY VIEW links is the clip art upload function. Use the BROWSE button to find the clip art file on your local machine. If you desire for your clip art to be search-able, enter keywords in the KEYWORDS box. KEYWORDS are entered simply as strings of text with no commas or other punctuation. Click on the ADD NEW button to initiate the upload. Valid files types for clip art include GIF, JPG, EPS, PS…..

CLIPART MASS ACTIONS

At the top of the Clip art Upload screen is an area titled MASS ACTIONS. This section was developed to assist you in editing groups of clip arts rather than doing so individually which can be time consuming. To utilize this feature, select each clip art that you wish to perform the same action on by placing check marks in each MASS SELECT box below the clip art images. MASS ACTIONS include MASS DELETE, MASS MOVE, MASS COPY, MASS REPLACE KEYWORDS, MASS ADD KEYWORDS. Be very careful using the mass actions as these operations can not be undone and a lot of changes can be made to your site with just a few clicks.

MANAGE CLIPART GROUPS

To add a new clip art group, click the ADD A NEW GROUP button on the LIBRARIES > MANAGE CLIPART GROUPS screen. === [REWRITE THE FOLLOWING] ===

NOTE: This tool allows you to set super categories between Groups. Super categories are to be used to offer your users clip art categories If you will set a product to use a Group which contains subgroups, the final result will be to show users the group names as clip art categories. Users will so see the clip arts associated with the selected group only, while “super category” and subgroups will be listed all together in a drop-down, ordered by name. To sum up the better way to setup groups if you want to have categories for users:

  1. define good separate groups
  2. set one of them as super for all the others (no matter which one)
  3. assign the “super” as group in product configuration for clip arts

Clip arts groups have precisely super-categories. As written in that page: [quote] NOTE: This tool allows you to set super categories between Groups. Super categories are to be used to offer your users clip art categories If you will set a product to use a Group which contains subgroups, the final result will be to show users the group names as clip art categories. Users will so see the clip arts associated with the selected group only, while “super category” and subgroups will be listed all together in a dropdown, ordered by name. To sum up the better way to setup groups if you want to have categories for users:

  1. define good separate groups
  2. set one of them as super for all the others (no matter which one)
  3. assign the “super” as group in product configuration for clip arts

USING CLIPART IN TEMPLATES

You need to create any complex drawing elements OUTSIDE of RTD and insert them as clip art RTD is not a full drawing program - it provides limited capabilities for the end user to assemble his design. If the customer has the ability to draw a surfboard, he probably already has a more powerful drawing tool. As far as changing colors of clip art, simply upload the clip art in vector format. If the clip art has 4 or less colors, you will be able to individually assign colors to it. When you upload your clip art, verify that it has a limited number of colors by looking at the clip art details. If your 2 color clip art shows as have 256 colors then your settings in the program that created the clip art are not correct. If you are still having problems once you try this, please let us know with complete details so that we can pinpoint your problem.